Monday, January 23, 2017

Palette's Product Review: Bondic Liquid Plastic Welder

(This is an expansion of the Plug of the Week from yesterday's podcast)

I'm fond of pointing out that preparedness isn't always about being ready for disaster; it's also about being able to handle the small emergencies of day-to-day life.

As an example of a tiny crisis, have you ever had to repair something tiny and fragile and precious to you or someone you care about? If so, you know how difficult that is to do, because you ultimately end up with having to affix a tiny little contact surface that doesn’t hold much glue to another tiny contact surface. You basically need three hands to fix it: one to hold the base unit steady, one to keep the broken part in place long enough for the glue to bond, and one to wipe away the excess glue that always seeps out between the cracks. Use too much glue and you get a mess; don't use enough glue and the object falls off.

My solution to this dilemma is Bondic, the liquid plastic welder.



If you’ve ever gone to the dentist and they’ve used UV light to cure a resin filling, you already know how Bondic works -- it's a pen-sized applicator that squeezes out drops of resin on one side and has a little UV light on the other. Apply what you need (up to a millimeter in thickness), then cure the liquid into a solid with a quick application of ultraviolet light from the lamp on the other end. The plastic bond is transparent even after curing, although it can be sanded and painted if necessary.

This works great for repairing tiny fragile things, because I no longer have to worry about using too much glue or having to hold the items in place. Instead, I just apply a small amount of glue, then secure the pieces with Bondic. The plastic weld holds the pieces together while the glue sets, and it serves as additional reinforcement as well.

Bondic has other uses, too:
  • You can fill holes with it (this is where the sanding and painting becomes useful)
  • You can create parts out of plastic (if you're patient -- the UV light can only penetrate 1mm in depth, so if you're building something large you have to do it layer by layer)
  • You can even use it on electronics as non-conductive solder, or to insulate exposed pieces. 
About the worst thing I can say about it is that its base layer doesn't have much tensile strength. If you use Bondic to repair something that gets a lot of flex (like frames for glasses), you need to use a lot of it, or else the thin plastic will snap.

I apologize if I sound like an infomercial for Bondic. I just really love mine because it's made my life so much easier when it comes to fixing my mother's damages collectibles -- which also means this helps repair upset feelings and maintains family harmony, too. If you're the "Mr. Fixit" in your family, I encourage you to add this to your toolbox.

You can get the Starter Kit from Amazon for $18 plus Prime shipping, and with that you get two tubes of liquid plastic and a UV light. The 12-piece DIY Kit has all that plus a variety of sanding blocks, sticks, and needles for just $25 and Prime shipping.

http://amzn.to/2iXAdLd
FTC disclaimer: I bought this item with my own money. I wasn't paid for this review, despite the fact that I gushed over it. Don't you have better things to do than read blogs looking for infractions?

No comments:

Post a Comment

The Fine Print


This work is licensed under a Creative Commons Attribution- Noncommercial- No Derivative Works 3.0 License.

Creative Commons License


Erin Palette is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.